High-Temp Replacement Gasket (20.5″)

Our replacement gasket allows for proper alignment and heat seal between the bottom and dome pieces of the kamado cooker. One gasket roll will cover both the top (lid) and bottom of the cooker. 

Removing your old gasket: The tape is heat activated. So first off, you want to heat your cooker or use a heat gun to heat the old gasket and remove it. Actually just heating your cooker is the easiest approach! Just make sure that you thoroughly clean the cooker top and bottom surfaces where the gasket is applied before you apply your new gasket. Use a scraper tool and scrape the surface of any residual gasket material. Make sure that all the old gasket is removed and the surfaces are smooth. Once removed, you’re ready to apply the new gasket.

Applying your new gasket: As previously mentioned, heating your cooker is the easiest approach! Let your cooker do all the work for you! Or you can use a heat gun or hair dryer to heat the back side or adhesive side of the gasket, then apply it. Once it’s hot, just carefully apply the gasket! That’s it! You’re good to go!